817962348288357.blogspot.com Website Review

Studio Location: 2F30, Lion Forest, Ximending, Taipei Opening hours: 15:00~21:00 Closed service on Monday Project: OEM repairs the first large-sized body. In many places, the screws must be locked, but because of the oldness, some parts prefer to leave a little gap. Also don't want to be too tight, which is the PG-level beam length. Although it seems to only pull down. There are actually multiple joints. The upper part is covered with a complete inner structure large cluster missiles & miniature missile pods. Only some basic color separation is available on one side. There are only eight. Can be opened. But there are eight that can be opened. It is also very spectacular. If all can be opened, it looks a bit complicated. The silver edge was originally wiped. The silver paint is too thin and will be fired. The oil is wiped off. But because it is going to be old. Instead, it reveals that the black bottom has an old feeling. There are six. There is a special way to spray the black background first. The center is sprayed with silver. (I originally wanted to use iron). Then the high temperature part was sprayed with transparent blue and yellow. Finally, it was discovered after a large range of thin sprayed cold iron spray. The effect was that there were more small nozzles inside the interior. Originally wanted to use HD. Nozzle. But the length is too long. So use the sac spiked base to put it up and stick it. If there is a hole, you can put it in the tip. But personally think it is too thick. It is not suitable. So I did not put some basic Separation. In addition to the hydraulic tu*e parts. The rest of the parts are not covered (separately just personally want to practice the stability of the airbrush). They are from dark to light from black iron gun iron color cold iron color. The color of the shadow is a bit similar to the nozzle. Just change the transparent blue and yellow. Change to Modo MK-41 smoked special effect paint originally wanted to be placed on the base. But the distance is too far. So the design has a space at the center. The outer armor can be opened and closed directly but the calculation is wrong here. The battery pack is placed on the fourth. It's too small. So it's only about 1.5 hours. It's usually blue to weaken this RG style. Compared to the past, the color is a bit lighter. The main color is white and steel white. Gray 2 A few will use the gray number 3. The main reason is that the client does not like the color difference. The difference is too much. It is the lighting mode. But because the personal studio is open, there will be external light interference. Under the special LED will have red, blue, green and yellow