Airmex-absauganlagen.de Website Review

AirMex suction systems filter z. As smoke, odors, vapors and dusts and thus ensure healthy air at your workplace. We adapt the filters of our extraction systems individually to your respective requirements. So you get for every dust, smoke, oil mist or gases your matching extraction system for spot or surface extraction. Our comprehensive range includes extraction systems, extraction arms and oil mist separators, as well as extraction walls or welding fume extraction systems. Reliable cleaning of dust, fine dust, mold or microorganisms in the room air. Statutory regulations for explosives and extraction systems can also be found at the Verwaltungs-Berufsgenossenschaft (extraction systems) Extractors for oil mist and emulsions usually work with special filters that are very well suited for the separation of aerosols (liquid micro-particles in the air). The filtered air is either returned to the work area or directed to the outside. For reasons of energy efficiency, an air return for a suction system makes more sense, as there are no More information on the operation of a suction system can also be found at Wikipedia (extraction systems). WHEN DOES IT NEED A HIGH AIR VOLUME CIRCUIT FOR A UNITED DEVICE? If the particles that are to be extracted by means of a suction system float, then devices with a high air volume flow (in m³) and a wide intake pipe (100-200 mm) are suitable. This allows larger volumes of air with less suction pressure through a wide. Here, a smaller amount of air is detected than in a conventional extraction system. A thinner suction hose (40-50 mm) creates a stronger suction pressure (vacuum) at the same time so that these dusts can be better absorbed. WHICH TYPES OF DUST CAN BE GATHERED FROM AN EXHAUST SYSTEM? It is usually possible to detect all types of dust and smoke that arise during the processing of materials. For the effective