Backlab.wordpress.com Website Review

The main cause of bios corruption is the update, but this is only convenient when you have to fix bugs or in any case it is extremely important to pay the utmost attention to: in this way, even in the case of ballerina or temporal tension, you will not run risks for bios, nor for the other components. from windows because if this will be unstable for any reason (malware, etc) you risk to greet your motherboard. well, after this brief but necessary premise we can see how to recover a bios after a bad flash. it is therefore necessary to intervene in different ways according to the bios and the age of the system. > If the block is due to overclocking too hard sometimes enough> move the clear cmos jumper to reset the parameters of> you want to wait) with a small screwdriver jumper the two poles> (+ and -) for a few seconds. it is often necessary to rename the bios in a certain way so that this is auto detected, so you will need andy p's for the old bios award you need to create a floppy bootable via another pc. the bios and the flashare utility (awdflash) remain to be copied to the floppy's root. now start the pc with the floppy inserted and the flash of the new bios should start. start wincris.exe, in the driver entry select your pen drive as destination and date start. follow the instructions on the screen after which, when requested, remove and reinsert the pen drive; continue clicking yes when it will prompt you to format another drive and click on start. when completed, close the program and remove the key. it's not finished yet: reconnect the pen drive and copy minidos.sys, phlash16.exe and bios.wph to its root. if it's a laptop remove the battery and disconnect the power cable (only the latter if it is a desktop PC) and insert the pen drive: press fn + b or win + b (depending on laptop or desktop) and holding them down again connect