Bugfound.blogspot.com Website Review

The majority of servo would use potentiometer to measure the position of the servo internally. So to measure the position of the servo we just need to tap into the voltage divider. One wire to the three largest centre pin and we WARNING always check the maximum voltage of the feedback before hooking the feedback wire to your micro controller. If you are running a 6V servo, plugging the feedback wire into your micro controller will smoke it. I love flying my helicopter but certain aspect of controlling the helicopter annoyed me. In the coming week I'll attempt to rectify the above issue by rebuilding all the electrical components of the standard helicopter (Head Lock Gryo, Flybarless Module, Radio Receiver). It's going to be rough journey but I'll learn a lot about electronics. The propose of this post are to help me keep tract of the project and help me remember the plans. I have a reasonably busy schedule of working, forex, salsa and data collection for forex. In the next few post I'll go into details about This morning I got a rude awakening, a staff call me and told me one of the database server is down. Since I'm not on site, I got her to check if the server was on. The server was dead quite some, instantly I think of power failure. I so got her to turn on the machine beep  It was silly of me to think of power failure, we got a UPS and three power supply for the database server. Once the machine turn on I did some checking and there was nothing wrong with the server at 11:49:03 suddenly all logs just stop. The only explanation is some one turn off the power via the UPS or unplug all three power supply. I'll investigate when I get to the The most disturbing event is when I check the mysql log and saw the following: > Relay log read failure: Could not parse relay log event entry. The > possible reasons are: the master's binary log is corrupted (you can > check this by running 'mysqlbinlog' on the binary log), the sl*ve's > relay log is corrupted (you can check this by running 'mysqlbinlog'