Creatroninc.com Website Review

There are 0 items in your cart. There are 0 items in your cart. Total products This development board is based on the ESP8266 WiFi enabled microcontroller. The ESP8266 is an integrated controller what has The low profile header set is great for making your own PCB wire connections. This is a low profile header set, which includes a wire housing, pcb socket, as well as the crimpable pins. The pitch spacing for the socket is 2.54mm.  This is a 14 pin SMD breakout board designed for components with both SOIC14 and TSSOP14 package. The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and include the necessary protection circuitry. Note: This product is only sold in store and is not available online.  The Bluefruit LE (Bluetooth Smart, Bluetooth Low Energy, Bluetooth 4.0) nRF8001 Breakout allows you to establish an easy to use wireless link between your Arduino and any compatible iOS or Android (4.3+) device. It works by simulating a UART device beneath the surface, sending ASCII data back and forth between the devices, letting you decide what data to.. This is a nice, bright alphanumeric display that shows letters and numbers in a beautiful yellow hue. It's super bright and designed for Benchtop DC Power Supply are often used in laboratory to provide continuous adjustable voltage and current. This is a CVCC (constant voltage constant current) three channel output power supply with floating ground. Two of the channels has an adjustable output voltage of 0 to 30VDC or 0 to -30VDC with an adjustable output current of 0 to 3A. The voltage.. The shrouded IDC header is similar to the standard pin headers. The pitch spacing for the shrouded header is 2.54mm. The shrouded IDC This is a RF M4 receiver operating in 315MHz frequency. You do not need any programming, or addressing to use these RF modules. Simply power the receiver with 5V and press the bu*ton on our matching keyfob. The first pin will activate when the A bu*ton is pressed on