Elementztechblog.wordpress.com Website Review

tech blog based on research and development done by the elementz team. the purpose of this tutorial is to enable the avr toolchain based debugging using avarice + avr-gdb combination in newer debian based versions. the avarice version 2.13+svn which is installed using the apt repository seems to broke the debugging. so we would be using 2.12 version of avarice for continuing the jtag debugging in newer… hi readers, this is my post after 1 year of domain change. now the good news is i am back home to develop more on hardware technologies. this post is intended to give some insights on lora technology for long distance communication by experimental tuning of parameters for. lcd serial interface board: an introduction to at commands & interfacing with micro-controller. hello enthusiasts, in this post, i am throwing some light into introducing lcd serial interface board ,familiarising you with its major at commands used to communicate with this board. along with this, the steps to interface this board with a micro-controller or serial to usb converter will be depicted as well. lcd serial interface board concatenates a…   hello technosiasts, in the previous blog on xigbee we have discussed about configuring the modules in order to enhance stringent communication between two modules. however, in order that two or more modules to communicate simultaneously substantiates the need for its re-configuration onto broadcast. broadcast configuration facilitates an added advantage of communication between many modules. hardware performance microcontroller from the atmel’s mega avr family. atmega16 is a 40 pin microcontroller based on enhanced risc architecture with 131 powerful instructions. it has a 16 kb programmable flash memory, static ram… avail this module easily from our online store avr usb programmer:-usbasp. this is also available… this guide is for advanced users who want to bridge the wifi of the raspberry pi to the ethernet port. please be careful with each step.