Kiiuo.com Website Review

Laravel 5.7 The default is to return the 404 view. If we make APIs that we want to return a 404 in JSON format, then refer to the following changes. If ($exception->getStatusCode() == 404) { DEVICE=ens33 <== Network card code, must be ifcfg-eth0 corresponds to BOOTPROTO=static <== boot protocol, there is dhcp and static here is static IPADDR= 192.168.122.19 <== IP NETMASK=255.255.255.0 <== Sub-mask network NETWORK=192.168.122.0 <== Domain! The first IP BROADCAST=192.168.122.255 of the network segment <== Broadcast address GATEWAY=192.168.122.1 <== Preset route ONBOOT=yes <== Whether to boot up About using Gmail settings, you can pay attention to this I Mentioned: The method of using Gmail SMTP to verify in PHP 'say' => 'Hello, this is the content of a test message' Mail::to($to)->send(new Warning($params)) ; } This will successfully send mail via Gmail! Incidentally, the above method is the official recommendation of Laravel's later period. Otherwise, according to our past experience, such as using PHPMailer, we may write together, such as $message->to('[email protected]' )->cc('[email protected]'); Bottom; the only remaining behavior in the controller is Which Mailable is used to send to whom. You can quickly know which send behaviors, and save time for each Controller, Services, Libraries lookup. I use a framework like Laravel that requires SMTP and verifies the Google Account pas*word, but because the account has 2 verifications enabled, our Google pas*word is not available. Usually SMTP will set Laravel so that it will appear as Failed to authenticate on SMTP server with username xx*@gmail.com using 3 possible authenticators. A set of 16 characters will be generated, returning to our SMTP settings, the original Use Google PHP – JOOMLA – Use JTOOLBARHELPER::LINK() instead of JTOOLBARHELPER::ADDNEW() Tips