Mcgard.com Website Review

The information included in McGard’s application guide is accurate to the best of our knowledge. Since vehicle manufactures and wheel manufactures can make running changes that are beyond our control the applications listed should be used as reference only. Due to the many wheel styles and fasteners available it is the installer’s ultimate responsibility to verify that the McGard part is the correct fastener style, thread size and seating surface (flat seat, cone seat, radius seat, shank style, cone-shank style etc.) as recommended by the wheel manufacturer. Minimum thread engagement must be equal to the thread diameter of the wheel stud or lug bolt. Always visually verify that the McGard fastener matches the fastener it is replacing. For help with this refer to the Application below. Be sure to read the complete Installation Instructions included with each package prior to installation. Any application questions should be confirmed by calling McGard Customer Service at 800-444-5847, Monday Friday, 8am to 5 pm Eastern By clicking ‘OK’ you acknowledge that you have read and understand the information presented above. By searching our site, you agree that the information you access is McGard’s proprietary information. You agree that you will only use the information for your personal use, and that you will not attempt to gather or copy McGard’s proprietary information for any commercial purpose. You agree that any unauthorized use of McGard’s proprietary information will cause McGard to suffer monetary damages By clicking ‘OK’ you acknowledge that you have read and understand the information presented above. -- 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984 1983 1982 1981 1980 1979 1978 1977 1976 1975 1974 1973 1972 1971 1970 1969 1968 1967 1966 1965 1964 1963 1962 1961 1960 1959 1958 1957 1956 1955 1954 1953 1952 1951 1950 1949 1948 1942 1941 1940 1937