Mechteacher.com Website Review

Sleeve and cotter joint is a type of joint used to typically connect two similar coaxial cylindrical rods. It contains a sleeve and two wedge shaped tapered cotters. Appropriate slots are cut in the sleeve and in the cylindrical rods. The cotters are as*embled into these I have seen many people having a lot of confusions regarding the as*embly of universal joint. In reality, as*embling a universal joint is a piece of cake. Just follow this step by step tutorial to do it yourself easily Note: In order to as*emble a universal joint, you need A typical universal joint consists of the following parts: Centre block Fork Pin Collar Taper Pin The following two parts are not integral to a universal joint. But they are required to complete the as*embly of the joint. Shaft Shaft Key All parts are discussed in In my previous article, I explained knuckle joint with its potential uses. A knuckle joint is suitable for connecting two intersecting cylindrical rods, whose axes lie on the same plane. In many cases, you might be required to connect shafts, whose axes (on different planes) Many people have asked me to explain knuckle joint with its parts, advantages, disadvantages and applications. I decided to write this article. Read every section of this article carefully and refer the images for a clear understanding. This article has the following Spur gears have their own advantages, disadvantages and applications. Advantages of Spur Gear: Spur gears have high power transmission efficiency. They are compact and easy to install. They offer constant velocity ratio. Unlike belt drives, spur gear drives have no slip.