Nkongkimo.wordpress.com Website Review

Search: inurl:security windows2008 site:microsoft.com Search: Search allinurl:cgi-bin phf +com. There are about 40 results, this is the first 1-10. The search took 0.06 seconds. Traditionally, PE is used for POP, but MPLS PHP is used by PE's previous Router to do POP. The service provider only does the link service provider. It only provides the VC service. Export: Identify which VPN member is the import. Each routing table as*ociates the value of the label with the value of the label to tell the Edge LSR to speed up the Routing. It does not need to parse the packet again. . (1) RIB (routing table), using routing protocol to exchange information (2) LIB (label table), using LDP protocol to exchange information of adjacent labels (1) FIB, using CEF to convert RIB into FIB (2) LFIB, by LIB conversion 1. First, there must be Routing information to as*ign tags, so you first need to have Routing Protocol, establish Routing table. 2. With the Routing table, the MPLS Router will as*ign the Label to the destination address (FEC) of the Routing Table. 3. LIB will be converted to LFIB (Data Plane) to transfer the packet by Label. Support most routing protocols to insert 32-bit Label Significant in layer2 and layer3: Loacl (divided into local and remote) 1. Change the IPv4 host address to Interface ID 2. Add Prefix ID to indicate Network (1) ) There are 0 in front to delete (2) 0000 can be used directly: Indicates (3) At least one 0 (4) Continuous 0 available: :,:: can only be expressed once (5):: Indicates that IP is unknown When (6)::1 indicates loopback IP address The MTU in IPv6 is detected by the Source Client and is not detected by the Router. 3. Use Neighbor Discovery to find the Router and Prefix, instead of IPv4 ARP, ICMP redirect, and IRDP. 4. When you run the Routing Protocol, you must specify the outgoing interface to negotiate the routing protocol. 1. IPv4-like Private IP is reserved for use. IPv6 Private IP 2. Can appear in the source and destination fields 3. Similar to IPv4 Unicast 3. The same IPv6 IP can be set on multiple devices 4. IPv6 One address (Global & Unique local) can be set in On multiple devices, the Router determines the best path to optimize the transmission. Great for Global Load balance