Pentalift.com Website Review

PENTALIFT EQUIPMENT CORPORATION: LOADING DOCK EQUIPMENT MANUFACTURER. Pentalift Equipment Corporation is one of North America’s largest manufacturers of loading dock equipment, lift tables and positioning equipment. Pentalift provides a complete line of mechanical, air powered and hydraulic dock levelers, vehicle restraint safety systems dock seals and dock lifts. Pentalift provides a complete line of hydraulic and pneumatic lift tables, tilt tables, rotating tables and custom designed lift tables and positioning equipment to suit a wide range of applications. Pentalift products are designed to increase exposed to the elements. Zinc plating the vehicle restraint improves the loading dock area’s aesthetics by eliminating any rusting on the unit itself. Contact a Pentalift Sales Representative for more information.. WHAT ARE THE SAFETY PRECAUTIONS THAT SHOULD BE TAKEN WHEN DOING MAINTENANCE ON A LIFT TABLE? maintenance must be done by trained personnel and all electrical work is suggested to be performed by an electrician. Nobody should go under the lift table unless properly supported by the lift table’s maintenance stand. Performing maintenance on a lift table should never be done with any sort of load on platform because the maintenance stand of the lift table is only designed to withstand the table’s weight without a load on platform. To increase safety and ease of maintenance, a central lubrication option can be acquired at time of purchase to lubricate leg rollers, leg pivot points, and cylinder points at a point of easy access. Contact a Pentalift Sales December 19, 2018, 11:14 am - There are 4 common finishes that are used with lift tables Enamel finishes are used mostly for standard industrial applications. Epoxy finishes are best suited for any wash down application or exterior installations where aesthetics is a concern. Hot dip galvanizing is most commonly used in applications where water is present, hot dip galvanizing prevents prema*ure rusting. Stainless steel finishes are most commonly used in a food processing application