Plexim.com Website Review

that reduces the occurrence of overlapping connections. The new auto-connection feature lets you quickly create connections between PLECS now lets you create dynamic mask icons for masked subsystems that change their appearance depending on parameter settings. You can also create dynamic dialogs by disabling or hiding a parameter or changing its value depending on the value of another parameter. hardware-in-the-loop (HIL) testing and rapid control prototyping. The arrangement above is used for real-time simulation of a grid-connected modular multi-level converter (MMC) with four interconnected RT Boxes. Each phase leg of the MMC consisting of 10 half-bridges has its own sl*ve controller and is simulated on a separate RT Box. The fourth box at the top simulates the pas*ive filters and the grid. The RT Boxes are interconnected via high-speed serial links on the back to exchange simulation data and synchronize the simulation step. All boxes run with a time step of 3 μs. The controls are implemented on four C2000 microcontrollers, which are connected to the front of each RT Box via LaunchPad Interface > Even though being new to PLECS and the PLECS RT Box, I was able to > successfully develop the simulation of a PFC stage with two boost > cells and the controls implemented in C code in only one day. > — Prof. Dr. Radu Bojoi, Power Electronics Innovation Center, Build a simple RLC network using the schematic editor and the component library. Design a buck converter in PLECS with controls modeled in Simulink.