Posterus.sk Website Review

to the readers and authors that we are about to finish publishing our magazine. We would like to thank everyone for their confidence and wish the most important operations that have an impact on performance, quality and cost. The batch temperature is a decisive variable in heating processes because it allows the batch processing phase to be determined when the desired material structure changes. At present, the temperature of the batch is not measured in technological processes for the following reasons: design of the furnace (moving batch), destruction of the metering sensor when as*embled or during the process, increased cost of operation of the furnace, The article describes a mathematical model based on the finite difference method for modeling internal temperatures in the batch, which is the steel coil annealed in the hatch furnace. The model calculates the internal batch temperature based on the temperature measured on its surface during the annealing process. The accuracy of the model was evaluated using experimental measurements on a real hatch furnace and a simulation model created in MATLAB. of course costs for households and companies. Since it is not possible to completely switch off lighting in rooms, it can not be saved when designing lighting. The only way is to save on the operation of the light system itself. This article discusses the possibilities of lighting control using Dialux. of a quantitative or qualitative nature. As part of the an*lysis of this issue, the concept of innovation from the perspective of different years is discussed. This issue deals with the numerical reliability an*lysis of the nuclear power plants, specially for the presurized water reactor (PWR) with four parallel operated divisions (300% active redundancyof main electrical systems Contrary to most of the similar studies, this is done with respect to the dynamic aspects of system operation