Tamcopaint.blogspot.com Website Review

9040 series duraflint 1 polyurethane enamel system 3:1:(1) > superior flow-out and leveling > outstanding durability > excellent gloss & color retention > economical to use. --3 parts polyurethane color --1 part hh-50 standard high solids hardener (or hh7603 fast,. hh-7605- medium, hh-7607 slow) --up to-1 part hh-reducer (metallic colors especially) > wash surface of vehicle with soap and water to remove tree sap and road dirt > wipe vehicle with wax & grease remover. > sand area as necessary to remove any rust or corrosion > prime repaired areas with hh-5310 or 5311 2k urethane primer > block primed body work with 400 grit or finer wet or dry sandpaper > cleanse area to be painted with wax & grease remover > seal vehicle using hp-6001 universal sealer pre-painted surfaces: > wash area to be painted with mild detergent and water > cleanse surface with wax & grease remover > sand area as needed to remove old paint or any rust using 320 grit > apply one full wet coat of hp-6001 universal sealer. > allow sealer 30 minutes dry time before topcoat. this product may require several components and must be mixed properly to comply with v. o. c. regulations. this product is not recommended as part of a multi-coat system if the polyurethane system application directions: > adjust hvlp air pressure to 30 psi at the gun > apply 2 full wet coats of polyurethane enamel color > allow 10-15 minutes flash time between color coats > allow vehicle to dry overnight before exposing to weather or finessing. application instructions: intregrating clear (use only hc-9040 clear!) > apply two wets coats polyurethane color per directions > add 1 part catalyzed color 1 part catalyzed hc-9040 clear & mix.. for maximum paint performance, vehicle should be kept above 75°f. temperatures. below 60°f will severely retard dry times and thorough cure of urethanes. 1 ounce of tamcure accelerator per mixed gallon may be added to speed up